Building
20 x 24 m portal frame shed in juniper green cladding, 10 m eaves, spray-foamed roof and precast concrete panels inside
Insulated 6 m sectional roller door with header box and switch, plus working personnel and plant room doors
Rear plant room with mezzanine and stairs, three full-height evaporator units, insulated pipework, isolators, distribution boards and a walk-in MCC panel with opening doors (drives, PLC, contactors, breakers and wiring inside)
Overhead air ducts with six spinning circulation fans, three outside condensers, weather louvres, temperature sensors and cabling, rodent bait stations and plenty of small details
Ventilation control
Open the fan control box in the plant room and switch FAN 1, 2 and 3 groups on or off
Fans spin up and coast down realistically, with sound and flashing run lamps while starting
Large control screen showing the air flow, evaporators, condensers, crop probe temperatures and trends
Fans are off when first bought
Object storage (shop option)
Store crop boxes and pallets: drop them in the worn yellow LOADING BAY in front of the door
Boxes stack 8 high inside, filling from the back of the store forward, with a clear walkway to the plant room
Unloaded boxes come out two high in the UNLOAD AREA on the apron
Choose “No” in the shop for a plain store without object storage (cheaper)
Lights
Separate switches for the store lights, plant room lights and an outside yard spotlight
Price: 185,000
Category: Sheds / Storage
V1.0.2.0
Fixed: the loading bay markings prompt now shows when standing by either yellow bollard at the roller door
Ceiling lamps now hang from the roof instead of floating below it
Circulation fans hung on galvanised drop rods with ceiling plates
Air ducts on proper trapeze hangers, all hanger rods reach the rafters
Gutters are now open channels with stop ends and outlets, moved in under the roof edge; downpipes connect into them
New click spot at the yellow bollards to remove or show the loading bay markings
Fixed flickering textures on the door frames and the long walls / gable ends
Fixed darker patches on the wall cladding (inverted sheet faces)
Light switches now stand upright on the wall facing the right way; plant room switch moved to the handle side of the door
Yard light changed to the TerraLED 20W spotlight
Fans spin up and coast down with sound and flashing run lamp; fans are off when bought
Fan control box door now opens correctly
Removed the hazard floor mat in front of the MCC panel
Added O&M manual tube next to the fan control box
